Results 1 to 7 of 7

Thread: Need help with transmission

  1. #1
    Inactive Member Miles B's Avatar
    Join Date
    December 30th, 2001
    Posts
    2
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hi,
    I posted this on another board, and it was recommended I come here..


    Hi,
    I could really use some help from you guys who know about these cars.. I don't actually own the car - I came to England on work and there's a Civic that needs some work so I can drive it. As I don't know much about these cars, or this car's history I'll give you as much as I know.. tell me if you need more details.

    I think it's a 90 GL? 2 door hatchback with a 1.4 SOHC? It's got dual carbs and the numbers next the engine say D14A1. Anway, the problem isn't the motor, it's the tranny. It has a 4 speed auto in it. Seems like when it gets ready to change gears, it's like I step on the clutch.. the engine revs and the drive stops.. then it grabs the next gear.. seems like it's sorta slipping all over the place too.. doesn't really seem to take off properly.

    So what do you think? I don't know any transmission shops here, and they would be plenty expensive anyway.. I am wondering how hard it would be to change the tranny? Where would I get a decent auto from? I could ship one in from the states I guess.. I also thought it might be easy to change to a manual maybe? Has anyone done this, and what's involved? These seem like great little cars, with most of the engines and parts interchangeable (I LOVE that).. I'd really like to change to a manual if it's possible/cheap/fairly easy.

    Thanks for your help - if I can give you any more info, please tell me what you need and which bit to look at and read the numbers off!

    Miles.

    ------------------

  2. #2
    Inactive Member Jmunk's Avatar
    Join Date
    November 21st, 2001
    Posts
    99
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Check the transmission fluid level. You may need to add fluid. If you need to add fluid than i hear that your only suspose to add Honda fluid to the tranmission.

    ------------------

  3. #3
    Inactive Member Ben L's Avatar
    Join Date
    July 6th, 2001
    Posts
    472
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    dude, check the tranny fluid. that's really what it sounds like. use 10w30..i put synthetic in mine but you don't have to. the filler is the 17 mm plug next to the right axle.


    ------------------
    -Ben L.
    1989 Civic Si
    1990 300ZX TT Stage III

  4. #4
    Inactive Member 91zc's Avatar
    Join Date
    October 3rd, 2001
    Posts
    576
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Ok, the transmission swap is not hard. My neighbor and I changed his trans on his 91 Si in the better part of a Saturday. It was two of us and it wasn't hard. It was just time consuming. You could probably source a trans for your particular model over there in the UK at a salvage yard or a try to find someone selling one. HTH smile

    ------------------
    1991 Civic 4dr
    B16
    a bunch of other mods

  5. #5
    Inactive Member gotatight92si's Avatar
    Join Date
    May 21st, 2001
    Posts
    413
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    but you didn't try to swap an auto tranny...it's a lil more involved. although, the biggest hassle is just getting it out...anyway, it sounds to me like the fluid needs to be changed/flushed/topped off. i'd try that first. could do wonders for the car. good luck.

    ------------------

  6. #6
    Inactive Member 91zc's Avatar
    Join Date
    October 3rd, 2001
    Posts
    576
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by gotatight92si:
    but you didn't try to swap an auto tranny...it's a lil more involved. although, the biggest hassle is just getting it out...anyway, it sounds to me like the fluid needs to be changed/flushed/topped off. i'd try that first. could do wonders for the car. good luck.

    <HR></BLOCKQUOTE>


    I guess I should have read the whole post....lol Yea, I wouldn't really want to try the auto to manual swap without someone who has done one helping me out. smile


    ------------------
    1991 Civic 4dr
    B16
    a bunch of other mods

  7. #7
    Inactive Member Miles B's Avatar
    Join Date
    December 30th, 2001
    Posts
    2
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Any tips on how to make sure i get all the old stuff out? OK, so is that the drain plug next to the axle?
    Will let you know how it goes - will give it a shot tomorrow. How much should it take? And how should i measure when it's full? most other cars I've done you just check it straight after turning it off..

    ------------------

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •